Dooyoun Corporation
PVC materials for card
Plastic card sheet for SIM card (PVC-ABS)
1.Thickness:0.20~0.85mm
2.Color: White
3.Surface tension:32-44
4.Roughness:Both sides matt
Specifications
The flame resistance is above FH-1 degree.The Vicat Softening Point (5kg Load) is 80-92 centi-degree
PVC ABS Core for SIM Card
Characters:
1.Thickness:0.20-0.85 mm
2.Color : White
3.Surface tension : 32-44
4.Product Type:Magnetic Card
5.Surface Finish:Film Lamination
6.Roughness:Both side matt
7.Vicat Point:91±2°C
Description:
The flame resistance is above FH-1 degree. it can be used to make SIM cards and other heat
resistance cards.
PVC uncoated overlay in roll
Thickness range: 40-100 Micron
Color: Transparent (Clear)
Size: Sheet size or Roll size
Roughness: Both sides matte
Vicat point: 72+2 ℃ (ISO306B50)
Descriptions : Overlay without a layer of thermal glue on the surface .It is mainly used to make the external film of credit cards and other cards
Characteristic：
1. Excellent stable quality
2. Special formulation according to each client's requirement
3. Exact sheet size cutting and thickness control
4. Low dust
5. Low static
6. Adjustable Vicat degree
7. Less than15 days Short Lead Time
8. Perfect packaging for transportation
9. Best after sell service
PVC uncoated overlay
Thickness range: 40-100 Micron
Color: Transparent (Clear)
Size: Sheet size or Roll size
Roughness: Both sides matte
Vicat point: 72+2 ℃ (ISO306B50)
Descriptions : Overlay without a layer of thermal glue on the surface .It is mainly used to make the external film of credit cards and other cards
Characteristic：
1. Excellent stable quality
2. Special formulation according to each client's requirement
3. Exact sheet size cutting and thickness control
4. Low dust
5. Low static
6. Adjustable Vicat degree
7. Less than15 days Short Lead Time
8. Perfect packaging for transportation
9. Best after sell service
PVC coated overlay (normal ink)
1.Thickness Range: 0.04-0.08MM
2.Finish: Matt
3.Size: Customized Roll size or Sheet size
4.High initial stick
Manufacture Method
1. Put printing core and two overlay together, then put into the laminator, the temperature is determined as per the instruction of the machine , Pls be noticed that all glue sides of both pvc sheets and overlay are put inward.
2. The lamination usually lasts 10-15minutes ,The pressure is 6-8Mpa, The temperature is 120-140°C
3. Cut the card
Pet G white core for card
Thickness range: 60-850 Micron
Color: white or customized
Vicat point 78±2°C
Surface tension 32-44 dynes/cm
Roughness: both side matte
Descriptions: It can be made for telephone card medical cards, IC card keys in hotels,
and other smart cards.